IXPLOR

20A MPPT Solar Controller

$67.15 $79

The Ixplor 20-amp MPPT solar controller has 99% tracking efficiency, meaning that you can generate up to 30% more energy over the same sunlight hours than PMW controllers. If the sunlight is limited throughout the day this can make the difference between a relaxed time away and days chasing the sun with your solar panels to keep things running.

The Ixplor 20-amp MPPT solar charge controller automatically recognises AGM, GEL, FLOODED, and LITHIUM batteries and applies the correct multi stage charging profile to safely and efficiently charge your battery type. With eleven built-in protection systems your equipment is safeguarded, ensuring your panels are protected whilst extending the lifespan of your battery.

A robust anodised aluminium housing with an IP67 rating means the Ixplor MPPT controller is protected from dust and water ingress making it an excellent solution for both portable and permanent installations.

Ixplor™ IX series MPPT Solar Controller Features:

  • Advanced Maximum Power Point Tracking (MPPT) technology, with tracking efficiency no less than 99% - generate up to 30% more energy over the same sunlight hours than a PMW controller
  • Charge profiles to suit most lead acid and Lithium battery systems (AGM, GEL, FLOODED, LiFePO4 and Li-NiCoMn)
  • Easy to see LED indicators which display the charging state, charging mode and diagnostic information
  • Strong anodised aluminium housing with IP67 dust and water ingress protection
  • Built in electronic protection
    • PV Over Current
    • PV Short Circuit
    • PV Reverse Polarity
    • Battery Reverse Polarity
    • Battery Over Voltage
    • Battery Over Discharge
    • Battery Overheating
    • Lithium battery Low Temperature
    • Load Overload
    • Load Short Circuit
    • Temperature sensor break down
  • Optional RS485 to USB connector or RS485 to Bluetooth Adapter Ability to configure and monitor via Mobile or PC (Note required to adjust user defined charge profiles)
  • 2-year warranty and 30-day money back guarantee

Nominal System Voltage

12/24VDC Auto (Lithium battery requires manual setting)

Battery input voltage range

20A

Rated charge/discharge current

260W/12V and 520W/24V

Max. PV open circuit voltage

60V (at minimum operating environment temperature )

46V (at 25℃ environment temperature)

MPP Voltage range

(Battery voltage+2V) ~36V

Battery Type

Lead-acid battery: Sealed (Default) / Gel / Flooded/User; Lithium battery: LiFePO4/ Li-NiCoMn/User Designed

Self-consumption

≤13mA(12V); ≤11.5mA(24V)

Temperature compensation

coefficient

-3mV/℃/2V (Lithium battery does not have temperature compensation coefficient)

Communication

RS485

Working environment Temp

-40℃~+60℃

Ingress Protection Rating

IP67

Overall dimension(mm)

153×105×52.1

Cable Sizing

12AWG(4mm2)

Connector

Genuine Anderson SB50™

Net weight

1.20kg

 

Charge Profiles

Lead- Acid

Equalize Charging

Voltage

Sealed :14.6V/Gel:No / Flooded:14.8V/User:9-17V

(double above numbers for 24v systems)

Boost Charging

Voltage

Sealed :14.4V/Gel:14.2V/Flooded:14.6V/User:9-17V

(double above numbers for 24v systems)

Float Charging

Voltage

Sealed/Gel/Flooded:13.8V/User:9-17V

(double above numbers for 24v systems)

Low Voltage

Reconnect Voltage

Sealed/Gel/Flooded:12.6V/User:9-17V

(double above numbers for 24v systems)

Low Voltage

Disconnect Voltage

Sealed/Gel/Flooded:11.1V/User:9-17V

(double above numbers for 24v systems)

Lithium

Boost Charging

Voltage

LiFePO4:14.5V/ Li-NiCoMn:12.5V / User:9-17V

(double above numbers for 24v systems)

Low Voltage

Reconnect Voltage

LiFePO4:12.8V / Li-NiCoMn:10.5V / User:9-17V

(double above numbers for 24v systems)

Low Voltage

Disconnect Voltage

LiFePO4:11.1V / Li-NiCoMn:9.3V / User:9-17V

(double above numbers for 24v systems)

Pre Order Now – Next Shipment Arrives April 5

Recently viewed